Philips HF-P 113 PL-C – £5.99

The Philips HF-P 113 PL-C is a non-dimmable high frequency ballast to run:1 x 13w lamps.This ballast has a flicker free warm-start circuit,50% longer lamp life and an automatic stop circuit (safety stop). The Philips HF-P PL-T/C range is suitable for Department stores,Suprmarkets, Hotels and Hospitals, It is also for use in emergency installations with re-ignition.


Philips HF-P 113 PL-C

Manufacturers Part No (where applicable) : HF-P 118 PL-T/C

This product is available for just £5.99
at Lamp Shop Online Ltd


View Item

Philips HID-PV C 150/S CDM – £36.00

The Philips HID-PV C 150 /S CDM electronic ballast runs 1x150w metal halide lamps.this ballast is for use in luminaire, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.


Philips HID-PV C 150/S CDM

Manufacturers Part No (where applicable) : HIDPVC150S

This product is available for just £36.00
at Lamp Shop Online Ltd


View Item

Philips HID-PV m PGJ5 20 /I CDM LPF – £37.20

The Philips HID-PV m 1×020 Independent Low Power Factor electronic ballast comes complete with strain relief and runs 1x20w PGJ5 Cap only metal halide lamp by Philips (see related products). This ballast is available as independent (/I) for independent use on a (false) ceiling, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM PGJ5 lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.


Philips HID-PV m PGJ5 20 /I CDM LPF

Manufacturers Part No (where applicable) : HIDPVM1020I

This product is available for just £37.20
at Lamp Shop Online Ltd


View Item

Philips HF-R 236 PL-L – £33.72

This Philips HF-R 236 TLD/PL-L dimmable ballast that runs 2 x 36w PL-L or 2 x 36w T8 tubes. This ballast’s lamp power can be regulated from 1% to 100%, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up.


Philips HF-R 236 PL-L

Manufacturers Part No (where applicable) : HF-R 236 PL-L

This product is available for just £33.72
at Lamp Shop Online Ltd


View Item

Philips HF-R 136 TL-D – £30.00

This Philips HF-R 136 TL-D dimmable ballast runs a 1 x 36w T8 fluorescent tubes. This ballast’s lamp power can be regulated from 1% to 100%, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up.


Philips HF-R 136 TL-D

Manufacturers Part No (where applicable) : HFR136TLDIII

This product is available for just £30.00
at Lamp Shop Online Ltd


View Item

Philips HF-R TD 218 PL-T/C – £46.76

This Philips HF-R TD 218 PL- T/C dimmable ballast runs between a 2 x 18w PL-T or a 2 x 18w PL-C. This ballast’s lamp power can be regulated from 1% to 100%, digital control input according to the industry standard DALI (digital addressable lighting interface) combined with the touch and dim pushbutton protocol, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up


Philips HF-R TD 218 PL-T/C

Manufacturers Part No (where applicable) : HF-R TD 218 PL-T/C

This product is available for just £46.76
at Lamp Shop Online Ltd


View Item

Philips HID-PV C 35 /I CDM – £22.31

The Philips HID-PV C 35 /l CDM electronic ballast comes complete with strain relief and runs 1x35w metal halide lamps.this ballast is available as independent (/I) for independent use on a (false) ceiling, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.


Philips HID-PV C 35 /I CDM

Manufacturers Part No (where applicable) : HIDPVC35I

This product is available for just £22.31
at Lamp Shop Online Ltd


View Item

Philips HF-R TD 2 95-120 TL5 – £46.44

This Philips HF-R TD 2 95-120 TL5 dimmable ballast runs between : 2 x 95w – 120w T5 fluorescent tubes. This ballast’s lamp power can be regulated from 1% to 100%, digital control input according to the industry standard DALI (digital addressable lighting interface) combined with the touch and dim pushbutton protocol, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up.


Philips HF-R TD 2 95-120 TL5

Manufacturers Part No (where applicable) : HF-R TD 2 95-120 TL5

This product is available for just £46.44
at Lamp Shop Online Ltd


View Item

Philips HF-R 180 TL5/PL-L – £37.80

This Philips HF-R TD 180 TL5/PL-L dimmable ballast runs between 1 x 80w T5 fluorescent tubes and 1 x 80w PL-L. This ballast’s lamp power can be regulated from 1% to 100%, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up.


Philips HF-R 180 TL5/PL-L

Manufacturers Part No (where applicable) : HF-R 180 TL5/PL-L

This product is available for just £37.80
at Lamp Shop Online Ltd


View Item

Philips HF-R TD 118 TL-D – £43.16

This Philips HF-R TD 118 TL-D dimmable ballast runs a 1 x 18w T8 fluorescent tubes. This ballast’s lamp power can be regulated from 1% to 100%, digital control input according to the industry standard DALI (digital addressable lighting interface) combined with the touch and dim pushbutton protocol, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up.


Philips HF-R TD 118 TL-D

Manufacturers Part No (where applicable) : HF-R TD 118 TL-D

This product is available for just £43.16
at Lamp Shop Online Ltd


View Item