Emergency 40w LED Panel 3000k – 600mm x 600mm – £69.90

Price Deduction. Was £75.48 Now £56.25!! An emergency 40w 600x600mm LED light panel that is suitable to be installed in all recessed applications. This emergency panel has a 3 hour rated duration in emergency mode, which uses a LIteplan NED/3/80 Emergency Module. The emergency panels come complete with battery and led emergency indicator. All components are pre-wired and tested in house so the customer can install them as easily as the standard panels. This super bright LED panel has a high lumen output of 3600 lumens and offers users a 37.5% energy savings. The panel emits a Warm white colour – 3000K and has an average life of 35,000 hours.     General Characteristics Wattage [W] 40w Voltage [V] 230 Lumens [lm] 3800 Dimensions [mm] 595×595 Beam Angle [°] 120 Average Life [h] 35,000 Colour Temperature [k] 4000 – Cool White Dimmable? No Equivalent Fluorescent Wattage [w] 72


Emergency 40w LED Panel 3000k - 600mm x 600mm

Manufacturers Part No (where applicable) : 45wledpanel

This product is available for just £69.90
at Lamp Shop Online Ltd


View Item

Britesource SOLO 7w All In One LED Downlight – £12.46

You are viewing the switchable colour temperature SOLO 7 All In One LED Downlight by Britesource. This is a 7w version of the popular SOLO 10 downlight. This unique downlight has the ability to switch between 3000k, 4000k & 6000k with a simple click of a switch on the fascia. This can be done without taking the downlight out of the ceiling like most switchable downlights on the market. The 7w LED downlight comes with a magnetic white bezel only which is placed over the fixed fascia covering the switch also. Optional bezels can be purchases if a different fascia cover is required (see related products).The 7w LED in 3000k warm white has a lumen output of 520, the 4000k cool white has a lumen output of 600 and the 6000k daylight has a lumen output of 530. Cool white is the most popular choice and has a slightly higher lumen output. The Fascia is IP65 rated and the full fitting is 90 minute fire rated to BS476-22 standards. Body construction is steel, aluminium & polycarbonate.This can be used in Zones 1 & 2 in bathrooms and comply with regulations. The fitting is dimmable and can be used with any quality trailing edge dimmer (maximum 20 fittings per circuit). The physical dimensions of the downlight are: 57mm x 82mm x 82mm excluding the driver. The compact design allow easy installation in shallow ceiling voids. Optimum working temperatures range between -30°c – +35°c, but maintaining a cooler environment will prolong the life of the LED. Average lamp life is 50,000 hours and is capable of 100,000 switch cycles. 3 year warranty covered by online registration.


Britesource SOLO 7w All In One LED Downlight

Manufacturers Part No (where applicable) : 834478

This product is available for just £12.46
at Lamp Shop Online Ltd


View Item

T8 3ft 14w Led Tube Frosted (High Output) – £7.80

T8 3ft (900mm) 14w LED tube with a frosted finish. Our T8 LED tubes are a direct retrofit*, there is no need for lamp control gear as the tubes are wired straight to the mains, these T8 LED tubes have a 30,000 hour lifespan, You can use 100% of the lumen output as there is no wastage, All our LED lighting is CE marked and ROHS compliant, They are available in pure white – 6000 kelvin. The lumen output of this tube is 1470lumens. *MUST remove control gear and starters inside your original fitting these LED tubes wire straight into the mains   Our LED tubes should use a single ended power supply – both live and neutral should be wired to the end labelled on the tube.   These LED tubes have a 3 year warranty.   Click here for data sheet


T8 3ft 14w Led Tube Frosted (High Output)

Manufacturers Part No (where applicable) : T83FT12W

This product is available for just £7.80
at Lamp Shop Online Ltd


View Item

Single 4ft LED Ready T8 IP65 Non-Corrosive Fitting Body – £13.16

A 4ft SIngle T8 IP65 Rated direct 240v led ready fitting. It comes pre-wired to one end of the fitting, which is suitable for single ended wiring LED T8 Tubes. IP rated fittings offer high ingress protection from moisture, dust, corrosion and vandalism.This unit does not included lamps. See compatible LED Tube in related products. Must not be used with Fluorescent tubes.


Single 4ft LED Ready T8 IP65 Non-Corrosive Fitting Body

Manufacturers Part No (where applicable) : IP65S-20WLED

This product is available for just £13.16
at Lamp Shop Online Ltd


View Item

Surface Mounting Kit For 600×600 LED Panels – White – £14.96

This is a suspension kit for our LED panels, allowing the LED panels to be suspended from a celing. These are ideal for spaces without a suspended ceiling. Packaging Info: Comes in 4 pieces complete with fixings Depth: 55mm Colour: White


Surface Mounting Kit For 600x600 LED Panels - White

Manufacturers Part No (where applicable) : KPTPNL/SMT

This product is available for just £14.96
at Lamp Shop Online Ltd


View Item

Twin 5ft LED Ready T8 IP65 Non-Corrosive Fitting Body – £20.38

A 5ft Twin T8 IP65 Rated direct 240v led ready fitting. It comes pre-wired to one end of the fitting, which is suitable for single ended wiring LED T8 Tubes. IP rated fittings offer high ingress protection from moisture, dust, corrosion and vandalism.This unit does not included lamps. See compatible LED Tube in related products. Must not be used with Fluorescent tubes.


Twin 5ft LED Ready T8 IP65 Non-Corrosive Fitting Body

Manufacturers Part No (where applicable) : IP65RT-25WLED

This product is available for just £20.38
at Lamp Shop Online Ltd


View Item

8ft 40w LED T8 Tube – Single Ended Wiring – £35.99

  High Output T8 8ft 2400mm 40w LED tubes with 676 individual LEDs and a frosted finish. Our T8 LED tubes are a direct retrofit, there is no need for lamp control gear as the tubes are wired straight to the mains (single ended). These T8 LED tubes have a 30,000 hour lifespan, You can use 100% of the lumen output as there is no wastage, All our LED lighting is CE marked and ROHS compliant, They are available in 4000k (cool white) and 6000k (daylight). The lumen output of these tubes is 3850 lumens. Our LED Tubes are 100% tested before we dispatch! What savings can you make by switching to LED tubes?   8ft Fluorescent Tube 8ft LED Tube Saving Per Tube Wattage 100w 40w 58% Reduction Electricity Cost Per Year £43.80 £18.40 £25.40 *Savings are based on 1 tube being on for 10 hours a day with an electricity cost of £0.12 per KW   Click here for data sheet


8ft 40w LED T8 Tube - Single Ended Wiring

Manufacturers Part No (where applicable) : T88FT676

This product is available for just £35.99
at Lamp Shop Online Ltd


View Item

Single 5ft LED Ready T8 IP65 Non-Corrosive Fitting Body – £15.56

A 5ft SIngle T8 IP65 Rated direct 240v led ready fitting. It comes pre-wired to one end of the fitting, which is suitable for single ended wiring LED T8 Tubes. IP rated fittings offer high ingress protection from moisture, dust, corrosion and vandalism.This unit does not included lamps. See compatible LED Tube in related products. Must not be used with Fluorescent tubes.


Single 5ft LED Ready T8 IP65 Non-Corrosive Fitting Body

Manufacturers Part No (where applicable) : IP65HFS-25WLED

This product is available for just £15.56
at Lamp Shop Online Ltd


View Item

Twin 2FT T8 LED READY Batten Fitting Body – £7.99

This is a twin 2ft T8 LED READY Batten Fitting that is compatible with any single ended mains voltage power supplied T8 tube. This fitting is a steel construction with a powder coated finish. The fitting is prewired ready for easy installation. This fitting has the option to be supplied with tubes to match see drop down box.


Twin 2FT T8 LED READY Batten Fitting Body

Manufacturers Part No (where applicable) : TBF-10WLED

This product is available for just £7.99
at Lamp Shop Online Ltd


View Item

Twin 6FT T8 LED READY Batten Fitting Body – £15.36

This is a twin 6ft T8 LED READY Batten Fitting that is compatible with any single ended mains voltage power supplied T8 tube. This fitting is a steel construction with a powder coated finish. The fitting is prewired ready for easy installation. This fitting has the option to be supplied with tubes to match see drop down box.


Twin 6FT T8 LED READY Batten Fitting Body

Manufacturers Part No (where applicable) : TBF-28WLED

This product is available for just £15.36
at Lamp Shop Online Ltd


View Item

SINGLE 6FT T8 LED READY Batten Fitting Body – £12.48

This is a single 6ft T8 LED READY Batten Fitting that is compatible with any single ended mains voltage power supplied T8 tube . This fitting is a steel construction with a powder coated finish. The fitting is prewired ready for easy installation. This fitting has the option to be supplied with tubes to match see drop down box.


SINGLE 6FT T8 LED READY Batten Fitting Body

Manufacturers Part No (where applicable) : SBF-28WLED

This product is available for just £12.48
at Lamp Shop Online Ltd


View Item