Dimmable 12w Round LED Panel 174mm 18w PL Replacement – £41.48

This Dimmable 12w White round LED Panel is an ideal replacement for compact fluorescent fittings. The dimensions are 174mm x 16mm which are ideal for shallow ceiling voids and any normal ceiling which accommodates recessed fittings. Colour temperatures available are 4000k (Cool White) only. This panel has an IP40 rating which means that they are sealed to prevent dust and particles getting into the fitting. The lumen output for this panel is 840lm and comes with a 3 year warranty. Driver included in the price. This fitting comes complete with a Tridonic driver to ensure the panel can be dimmed on constant current from 1-100%  Cut Out: 153mm Click here to see our additional Data Sheet  


Dimmable 12w Round LED Panel 174mm 18w PL Replacement

Manufacturers Part No (where applicable) : PL011-12W

This Bright Source product is available for just £41.48
at LampShopOnline Ltd


View Item

Bright Source 36w TP(a) LED Panel 3000K – 600mm x 600mm – 5YG – £27.47

The Bright Source 36w 600x600mm 3000k LED Panel is an easy to fit, 10mm thick panel suitable for installing in any recessed application in both residential and commercial environments. These panels are often used in offices, shops, corridors or any space with a recessed ceiling. This LED light panel has a high lumen output of 3600 lumens and has a sleek white framed finish. These panels offer energy savings of up to 44% when replacing old T8 4x18w modular recessed fittings. This LED Panel is ‘backlit’ meaning the LED chips are directly behind the diffuser instead of around the edge. This ensures a smooth spread of even light across the whole panel. Backlit panels also reduce the risk of any glare or yellowing. The design of the panel means they are slightly thicker depth but still extremely lightweight and easy to fit What is a TP(a) rating? – TP(a) rating relates to polycarbonate diffusers and states that the material that is used will self-extinguish and will not still be glowing or flaming for more than five seconds after a flame has been removed. The colour temperature of this panel is 3000K, Warm White giving off a warmer softer white colour. The panel also has an average life of 30,000 hours, twice as long as a T8 tubes, making it extremely cost-effective and significantly reducing maintenance costs. Bright Source 600×600 LED Panels have a low glare UGR <19 rating, in compliance with EN12464-1 The panel comes with a 5-year warranty for peace of mind. Please Note: This LED Panel does NOT fit in our Bright Source surface mounting kits due to their slimline design. General Characteristics Wattage [W]  – 36wVoltage [V] – 230/240vLumens [lm] – 3600 TestedDimensions [mm] – 595x595Beam Angle [°] – 120Average Life [h] – 30,000Colour Temperature [k] – 3000Dimmable? – NoEquivalent Fluorescent Wattage [w] – 72wIP Rating – IP40


Bright Source 36w TP(a) LED Panel 3000K - 600mm x 600mm - 5YG

Manufacturers Part No (where applicable) : 223504

This Bright Source product is available for just £27.47
at LampShopOnline Ltd


View Item

Surface Mounting Kit For 600×600 LED Panels – White – £10.98

This is a suspension kit for our LED panels, allowing the LED panels to be suspended from a celing. These are ideal for spaces without a suspended ceiling. Packaging Info: Comes in 4 pieces complete with fixings Depth: 43mm Colour: White


Surface Mounting Kit For 600x600 LED Panels - White

Manufacturers Part No (where applicable) : KPTPNL/SMT

This Bright Source product is available for just £10.98
at LampShopOnline Ltd


View Item

Bright Source 6ft Single 36w LED Batten IP65 – 4000k c/w PIR Sensor – £76.76

This is a Bright Source 6ft Single 36w LED IP65 Batten in cool white, designed to replace traditional non corrosive 1 x 70w T8 Fluorescent tube fittings offering energy savings of 50%. With an average life span over 50,000 hours, this averages at over 10 years based on normal use, significantly reducing maintenance costs. The batten also boasts a lumen output of 3600 lumens. These luminaires come with an IP65 rating, perfect for use in warehouses and factories as well as being used to light indoor and outdoor spaces in applications such as car parks and garages. Constructed with a robust steel powder coated white body and polycarbonate lens with a integrated Epistar LED Board and stainless steel mounting clips. The batten comes equipped with a unique Miniature Retrofit Luminaire Mounted, PIR presence detector with a 10 seconds – 99 Minutes time delay, providing automatic control of lighting loads. specially designed to mount on batten luminaires or linear type fittings of similar style.  This product comes with a 5 year warranty for peace of mind. Please view our related products for Emergency options. General Characteristics Wattage [W]      36 Voltage [V]         220 – 240v Lumens [lm]       3600 IP Rating [IP]      65 Colour [K]            4000 (Cool White) Avg. Life [hrs]    50000 Part code             207047 Click here to see our additional Data Sheet


Bright Source 6ft Single 36w LED Batten IP65 - 4000k c/w PIR Sensor

Manufacturers Part No (where applicable) : 207047

This Bright Source product is available for just £76.76
at LampShopOnline Ltd


View Item

SOLO All In One 10w LED Dimmable Downlight – £18.55

We are the only official online distributor of Bright Source products (formally “Brite” Source) and the largest online stockists of the popular SOLO Downlight. As such we are the cheapest online supplier for the all in one downlight, so look no further! If you do happen to find them cheaper elsewhere, we will beat any other online retailers price on this item. This is an all in one 10w Dimmable LED downlight also known as the SOLO10 It comes complete with 3 fascia finishes, including, brushed steel, white, chrome and 3 colour temperatures. The colour can be easily changed between 3000k, 4000k & 6000k by a switch located underneath the bezel. This innovative product is effectively 9 products in 1, meaning you only have to stock 1 product instead of 9 and returns can be kept to a minimum from customers not sure which light temperature to choose. The product still comes with a no-quibble 5-year warranty. The PL001-10W All-In-One LED downlight is dimmable via trailing edge dimmers. Cut Out 65mm The All in One Downlight comes equipped with the GST18 plug and play connector Click here to see our Data Sheet Dimensions: 110mm (L) x 82mm (W) x 85mm (D) with a 65mm Cut Out General Characteristics Wattage[W]       10w Voltage[V]          220-240 Lumens[lm]        800lm – 900lm Colour[K]             3000k Warm White, 4000k Cool White, 6000k Daylight Fire Rated           90 minutes Dimmable           Yes Beam Angle[°]   70 IP Rating              65 Lifetime               50,000 hours Warranty             5 years     **Please note that the brass bezel is no longer included in the new SOLO10 pack** But it can be purchased separately.


SOLO All In One 10w LED Dimmable Downlight

Manufacturers Part No (where applicable) : PL001-10W

This Bright Source product is available for just £18.55
at LampShopOnline Ltd


View Item

Bright Source Emergency 240w LED High Bay 5000k Dimmable – IP65 – £213.56

This product is a 240w highbay with a lumen output of 32,400. It can be used as an LED High bay for high ceilings, but it also has a compact design allowing it to be used as an LED Low bay. Perfect for warehouses, car parks, factories, sports halls and also can be used in the food industry as the lens is made from polycarbonate instead of the standard glass lens.This The product is an LED alternative to a 400w Metal Halide fitting giving you a 50% wattage reduction. This product comes with a 120° beam angle. This High bay has a hanging bolt eye on the back and comes complete with a hanging chain for mounting. Also featured is a safety cable that helps with the easy and reassuring installation. It comes complete with a 5-year warranty and an average life of 50,000 hours. Energy Rating A* This emergency high bay has a 3 hour rated duration in emergency mode, which uses a Philips PHL-EL3 Emergency Module. The emergency high bay comes complete with a battery and led emergency indicator. All components are pre-wired and tested in the house so the customer can install them as easily as the standard high bays. Dimensions:360x360x215 mm PLEASE NOTE: Emergency Pack Is Not IP65 Rated


Bright Source Emergency 240w LED High Bay 5000k Dimmable - IP65

Manufacturers Part No (where applicable) : 217039

This Bright Source product is available for just £213.56
at LampShopOnline Ltd


View Item

Bright Source 240w LED High Bay 5000k Dimmable – IP65 – £142.76

This product is an ultra-lightweight 240w LED Multibay with a lumen output of 32,400. It can be used as an LED High bay for high ceilings, but it also has a compact design allowing it to be used as an LED Low bay. This Product is an LED alternative to a 400w Metal Halide fitting giving you a 50% wattage reduction. It comes complete with a 5-year warranty and average life of 50,000 hours. Energy Rating A* Perfect for warehouses, car parks, factories, sports halls, and also can be used in the food industry as the lens is made from polycarbonate instead of the standard glass lens. This product comes with a 120° beam angle which is ideal for 99% of applications and installs. If you need a different beam angle please call us to discuss a bespoke setup and a quote. The LED Multibay comes complete with a Meanwell 3 in 1 dimmable driver & SMD 3030 Chips. This High bay has a hanging bolt eye on the back and comes complete with hanging chain for mounting. Also featured is a safety cable which helps with easy and reassuring installation.  Dimensions: 360x360x215 mm Please note: If you’re wanting to Dim these particular fittings you will need to purchase the Merrytek DImmable Lighting Control Switch for each high bay. They work by dimming when there is no motion detected and cannot be manually controlled.


Bright Source 240w LED High Bay 5000k Dimmable - IP65

Manufacturers Part No (where applicable) : 217039

This Bright Source product is available for just £142.76
at LampShopOnline Ltd


View Item

Bright Source Emergency 36w TP(a) LED Panel 4000K – 600mm x 600mm – £75.47

Bright Source 36w TP(a) LED Panel 4000K – 600mm x 600mm is an easy to fit, 10mm thick panel suitable for installing in any recessed application in both residential and commercial environments. These panels are often used in offices, shops, corridors or any space with a recessed ceiling. This LED light panel has a high lumen output of 3600 lumens and has a sleek white framed finish. These panels offer energy savings of up to 44% when replacing old T8 4x18w modular recessed fittings. This LED Panel is ‘backlit’ meaning the LED chips are directly behind the diffuser instead of around the edge. This ensures a smooth spread of even light across the whole panel. Backlit panels also reduce the risk of any glare or yellowing. The design of the panel means they are slightly thicker depth but still extremely lightweight and easy to fit This emergency panel has a 3 hour rated duration in emergency mode, using a Liteplan NED/3/80 Emergency Module. The emergency panels come complete with an emergency battery and led emergency indicator. All components are pre-wired and tested in house so the customer can install them as easily as the standard panels. The colour temperature of this panel is 4000K, cool white giving off a crisp, bright white colour. The panel also has an average life of 30,000 hours, twice as long as a T8, making it extremely cost-effective and significantly reducing maintenance costs. Bright Source 600×600 LED Panels have a low glare UGR <19 rating, in compliance with EN12464-1 The panel comes with a 5-year warranty for peace of mind. Please Note: This LED Panel does NOT fit in our Bright Source surface mounting kits due to their slimline design. We also offer surface mounting kits as well as emergency and dimmable versions of these panels which can be seen in the related products tab below. General Characteristics Wattage [W]  – 36wVoltage [V] – 230/240vLumens [lm] – 3600 TestedDimensions [mm] – 595x595Beam Angle [°] – 120Average Life [h] – 30,000Colour Temperature [k] – 4000Dimmable? – NoEquivalent Fluorescent Wattage [w] – 72wIP Rating – IP40


Bright Source Emergency 36w TP(a) LED Panel 4000K - 600mm x 600mm

Manufacturers Part No (where applicable) : 223511

This Bright Source product is available for just £75.47
at LampShopOnline Ltd


View Item

Bright Source Dimmable 16w LED Polo Fitting CCT – Motion Sensor – £70.76

This is a Dimmable Bright Source 16w LED Motion Sensor Polo Fitting, ideal for replacing 2D fittings. This fitting features the ability to switch colour temperatures from 3000k Warm White to 4000k Cool White to 6500k Daylight. Offering energy savings of 42% and boasting a lumen output of 1250 lumens. These fittings are often used in retail shops, public buildings, communal areas, sports centers, stairwells, corridors, walkways. Equipped with a Microwave Sensor built into the fitting. Microwave sensing works by detecting movement from a 360° angle and can also detect movement through solid objects. They have an average life of 50,000 hours, over five times longer than the 28w fluorescent 2D, significantly reducing maintenance costs. The LED Polo fitting comes with a 5-year warranty for peace of mind. Please see related products for Polo Fittings with emergency modes, microwave sensors and both emergency and microwave sensor features. Dimensions: 327 x 327 x 110mm Dimmable Options Explained: 0-10v – A 0–10V dimming driver sends a low DC voltage signal to the fluorescent ballast or LED driver. The lighting changes as the voltage is varied. So, at 0v the light will dim to 0% and turn off. At 10v the driver is operating at 100% and the light will be fully on. A 0-10v dimming system can operate 10 LED products per controller. DALI – This panel comes complete with a TC Jolly Dali dimmable LED driver to enable this panel to be dimmed via a PC or Wall Interface system. It can be dimmed as a group or singular. This also enables the fitting to work on a corridor function and has options for pre-set scenes. DSI – The driver receives a digital signal which tells it how to respond. The advantage of digital dimming is that fixtures are addressable. You can also have many more different levels of light output. TRIAC – TRIAC Dimming otherwise known as phase-cut dimming, TRIAC dimming act as a high-speed switch and are used to control the amount of electrical energy passing to the lamp. A ‘trigger’ dictates what point the device starts to conduct the electricity, the quicker the switch reacts the more power is let through and the later it reacts the less power, resulting in the dimming of the LED. TRIAC Dimmers include leading and newer trailing edge switches.


Bright Source Dimmable 16w LED Polo Fitting CCT - Motion Sensor

Manufacturers Part No (where applicable) : 243250

This Bright Source product is available for just £70.76
at LampShopOnline Ltd


View Item