Bright Source Emergency Dimmable 16w LED Polo Fitting CCT 3000k / 4000k / 6000k – £87.56

This is an Emergency Dimmable Bright Source 16w LED Polo Fitting, ideal for replacing 2D fittings. This fitting features the ability to switch colour temperatures from 3000k Warm White to 4000k Cool White to 6500k Daylight. Offering energy savings of 42% and boasting a lumen output of 1250 lumens. These fittings are often used in retail shops, public buildings, communal areas, sports centers, stairwells, corridors, walkways. This fitting is equipped with built-in emergency modules and emergency battery with a 3 hours emergency duration period after a 24 hour charging time. They have an average life of 50,000 hours, over five times longer than the 28w fluorescent 2D, significantly reducing maintenance costs. Dimensions: 327 x 327 x 110mm Dimmable Options Explained: 0-10v – A 0–10V dimming driver sends a low DC voltage signal to the fluorescent ballast or LED driver. The lighting changes as the voltage is varied. So, at 0v the light will dim to 0% and turn off. At 10v the driver is operating at 100% and the light will be fully on. A 0-10v dimming system can operate 10 LED products per controller. DALI – This panel comes complete with a TC Jolly Dali dimmable LED driver to enable this panel to be dimmed via a PC or Wall Interface system. It can be dimmed as a group or singular. This also enables the fitting to work on a corridor function and has options for pre-set scenes. DSI – The driver receives a digital signal which tells it how to respond. The advantage of digital dimming is that fixtures are addressable. You can also have many more different levels of light output. TRIAC – TRIAC Dimming otherwise known as phase-cut dimming, TRIAC dimming act as a high-speed switch and are used to control the amount of electrical energy passing to the lamp. A ‘trigger’ dictates what point the device starts to conduct the electricity, the quicker the switch reacts the more power is let through and the later it reacts the less power, resulting in the dimming of the LED. TRIAC Dimmers include leading and newer trailing edge switches.


Bright Source Emergency Dimmable 16w LED Polo Fitting CCT 3000k / 4000k / 6000k

Manufacturers Part No (where applicable) : 243267

This Bright Source product is available for just £87.56
at LampShopOnline Ltd


View Item

Bright Source Emergency Dimmable 16w LED Polo Fitting CCT – Motion Sensor – £95.96

This is an Emergency Dimmable Bright Source 16w LED Motion Sensor Polo Fitting, ideal for replacing 2D fittings. This fitting features the ability to switch colour temperatures from 3000k Warm White to 4000k Cool White to 6500k Daylight. Offering energy savings of 42% and boasting a lumen output of 1250 lumens. These fittings are often used in retail shops, public buildings, communal areas, sports centers, stairwells, corridors, walkways. Equipped with a Microwave Sensor built into the fitting. Microwave sensing works by detecting movement from a 360° angle and can also detect movement through solid objects. Also equipped with built-in emergency modules and emergency battery with a 3 hours emergency duration period after a 24 hour charging time. They have an average life of 50,000 hours, over five times longer than the 28w fluorescent 2D, significantly reducing maintenance costs. The LED Polo fitting comes with a 5-year warranty for peace of mind. Please see related products for Polo Fittings with emergency modes, microwave sensors and both emergency and microwave sensor features. Dimensions: 327 x 327 x 110mm Dimmable Options Explained: 0-10v – A 0–10V dimming driver sends a low DC voltage signal to the fluorescent ballast or LED driver. The lighting changes as the voltage is varied. So, at 0v the light will dim to 0% and turn off. At 10v the driver is operating at 100% and the light will be fully on. A 0-10v dimming system can operate 10 LED products per controller. DALI – This panel comes complete with a TC Jolly Dali dimmable LED driver to enable this panel to be dimmed via a PC or Wall Interface system. It can be dimmed as a group or singular. This also enables the fitting to work on a corridor function and has options for pre-set scenes. DSI – The driver receives a digital signal which tells it how to respond. The advantage of digital dimming is that fixtures are addressable. You can also have many more different levels of light output. TRIAC – TRIAC Dimming otherwise known as phase-cut dimming, TRIAC dimming act as a high-speed switch and are used to control the amount of electrical energy passing to the lamp. A ‘trigger’ dictates what point the device starts to conduct the electricity, the quicker the switch reacts the more power is let through and the later it reacts the less power, resulting in the dimming of the LED. TRIAC Dimmers include leading and newer trailing edge switches.


Bright Source Emergency Dimmable 16w LED Polo Fitting CCT - Motion Sensor

Manufacturers Part No (where applicable) : 243274

This Bright Source product is available for just £95.96
at LampShopOnline Ltd


View Item

Bright Source Emergency Battery 8 Cell 4+4 loose stick 9.6v 4.0ah – £25.76

This is a Bright Source Emergency Battery 8 Cell 4+4 loose stick 9.6v 4.0ah, a D cell nickel-cadmium rechargeable battery with flying leads, ideal for use within emergency lighting applications. These batteries are often used with emergency bulkheads, polo fittings and with LED panels and downlights for emergency uses. Typically used in offices, corridors, exit areas, schools and public buildings. These batteries have been manufactured to be used in fittings with limited space. Tied together with cable ties which can be cut to manoeuvre into tight spaces or fittings. Please note that Ni-Cd batteries are supplied with a residual charge and should be charged at the continuous charge rate before use.


Bright Source Emergency Battery 8 Cell 4+4 loose stick 9.6v 4.0ah

Manufacturers Part No (where applicable) : EMB-844L-N

This Bright Source product is available for just £25.76
at LampShopOnline Ltd


View Item

Bright Source 16w LED Polo Fitting CCT – Emergency c/w Motion Sensor – £46.55

This is a Bright Source 16w LED Polo Fitting with Emergency mode and comes with a Motion Sensor, ideal for replacing 2D fittings. This fitting features the ability to switch colour temperatures from 3000k Warm White to 4000k Cool White to 6500k Daylight. Offering energy savings of 42% and boasting a lumen output of 1250 lumens. These fittings are often used in retail shops, public buildings, communal areas, sports centres, stairwells, corridors, walkways. Equipped with built-in emergency modules and emergency battery with a 3 hours emergency duration period after a 24 hour charging time. Also with a Microwave Sensor built in to the fitting. Microwave sensing works by detecting movement from a 360° angle and can also detect movement through solid objects. They have an average life of 50,000 hours, over five times longer than the 28w fluorescent 2D, significantly reducing maintenance costs. This Fitting is IP54 rated meaning it is protected against light water splashes from all directions. The LED Polo fitting comes with a 5 year warranty for peace of mind. Please see related products for Polo Fittings with emergency modes, microwave sensor and both emergency and microwave sensor features. Chrome Bezel also available separately. Dimensions: 327 x 327 x 110mm


Bright Source 16w LED Polo Fitting CCT - Emergency c/w Motion Sensor

Manufacturers Part No (where applicable) : 243274

This Bright Source product is available for just £46.55
at LampShopOnline Ltd


View Item

Bright Source 16w LED Polo Fitting CCT – Emergency – £38.39

This is a Bright Source 16w LED Polo Fitting with Emergency mode, ideal for replacing 2D fittings. This fitting features the ability to switch colour temperatures from 3000k Warm White to 4000k Cool White to 6500k Daylight. Offering energy savings of 42% and boasting a lumen output of 1250 lumens. These fittings are often used in retail shops, public buildings, communal areas, sports centres, stairwells, corridors, walkways. Equipped with built-in emergency modules and emergency battery with a 3 hours emergency duration period after a 24 hour charging time. They have an average life of 50,000 hours, over five times longer than the 28w fluorescent 2D, significantly reducing maintenance costs. This Fitting is IP54 rated meaning it is protected against light water splashes from all directions. The LED Polo fitting comes with a 5-year warranty for peace of mind. Please see related products for Polo Fittings with emergency modes, microwave sensor and both emergency and microwave sensor features. Chrome Bezel also available separately. Dimensions: 327 x 327 x 110mm


Bright Source 16w LED Polo Fitting CCT - Emergency

Manufacturers Part No (where applicable) : 243267

This Bright Source product is available for just £38.39
at LampShopOnline Ltd


View Item

Bright Source Emergency Battery 6 Cell 3+3 loose stick 7.2v 4.0ah – £15.59

This is a Bright Source Emergency 6 Cell 3+3 Battery 7.2v 4.0ah, a D cell nickel-cadmium rechargeable battery with flying leads, ideal for use within emergency lighting applications. An equivalent to the YUASA 6DH4-0L5, These batteries are often used with emergency bulkheads, polo fittings and with LED panels and downlights for emergency uses. Typically used in offices, corridors, exit areas, schools and public buildings. These batteries have been manufactured to be used in fittings with limited space. Tied together with cable ties which can be cut to manoeuvre into tight spaces or fittings. Please note that Ni-Cd batteries are supplied with a residual charge and should be charged at the continuous charge rate before use.


Bright Source Emergency Battery 6 Cell 3+3 loose stick 7.2v 4.0ah

Manufacturers Part No (where applicable) : 187103

This Bright Source product is available for just £15.59
at LampShopOnline Ltd


View Item

Bright Source Emergency 6 Cell Battery Side by Side 7.2v 4.0ah – £15.55

This is a Bright Source Emergency 6 Cell Battery Side by Side 7.2v 4.0ah, a D cell nickel-cadmium rechargeable battery with flying leads, ideal for use within emergency lighting applications. This battery is equivalent to the Yuasa 6DH4-0L3. These batteries are often used with emergency bulkheads, polo fittings and with LED panels and downlights for emergency uses. Typically used in offices, corridors, exit areas, schools and public buildings. Please note that Ni-Cd batteries are supplied with a residual charge and should be charged at the continuous charge rate before use.


Bright Source Emergency 6 Cell Battery Side by Side 7.2v 4.0ah

Manufacturers Part No (where applicable) : EMB-6SS-BS

This Bright Source product is available for just £15.55
at LampShopOnline Ltd


View Item

Bright Source Emergency 3 Cell (2+1) Battery 3.6v 4.0ah – £8.72

This is a Bright Source Emergency 3 Cell Battery 3.6v 4.0ah, a D cell nickel-cadmium rechargeable battery with flying leads, ideal for use within emergency lighting applications. These batteries are often used with emergency bulkheads, polo fittings and with LED panels and downlights for emergency uses. Typically used in offices, corridors, exit areas, schools and public buildings. These batteries have been manufactured to be used in fittings with limited space. Tied together with cable ties which can be cut to manoeuvre into tight spaces or fittings. Please note that Ni-Cd batteries are supplied with a residual charge and should be charged at the continuous charge rate before use.


Bright Source Emergency 3 Cell (2+1) Battery 3.6v 4.0ah

Manufacturers Part No (where applicable) : EMB-321L-N

This Bright Source product is available for just £8.72
at LampShopOnline Ltd


View Item

Bright Source Emergency 5 Cell (2+3) Battery 6.0v 4.0ah – £13.76

This is a Bright Source Emergency 5 Cell (2+3) Battery 6.0v 4.0ah, a D cell nickel-cadmium rechargeable battery with flying leads, ideal for use within emergency lighting applications. These batteries are often used with emergency bulkheads, polo fittings and with LED panels and downlights for emergency uses. Typically used in offices, corridors, exit areas, schools and public buildings. These batteries have been manufactured to be used in fittings with limited space. Tied together with cable ties which can be cut to manoeuvre into tight spaces or fittings. Please note that Ni-Cd batteries are supplied with a residual charge and should be charged at the continuous charge rate before use.


Bright Source Emergency 5 Cell (2+3) Battery 6.0v 4.0ah

Manufacturers Part No (where applicable) : EMB-532L-N

This Bright Source product is available for just £13.76
at LampShopOnline Ltd


View Item